Mumbai-based Jyoti Steels is a reliable manufacturer and supplier of high-quality Monel Fasteners, designed to deliver superior performance in corrosive and high-stress conditions. With a focus on quality and accuracy, Jyoti Steels offers a comprehensive variety of Monel fasteners such as bolts, nuts, washers, and studs, suitable for use in marine, chemical processing, oil & gas, and aerospace industries. These fasteners are produced to international standards, providing lasting strength, resistance to corrosion by oxidation, and outstanding mechanical strength withstanding rigorous operating conditions.
| Standard | ASTM B564, ASME SB564 |
| Grade | 400 (N04400), 500 (N05500). |
| Size | M02 to M33 |
| Length | UPTO 5 METERS |
| Type | Bolts, nuts, Washers, Anchor Fasteners, Stud Bolts, Eye Bolt, Stud, Threaded Rod, Cotter Pin, Socket Screw, Fine Fasteners & Spares, Foundation Fasteners, etc. |
| Ni | Fe | C | Mn | Si | Cu | Al | Ti | S |
|---|---|---|---|---|---|---|---|---|
| 63.0 min | 05 – 2 | 0.25 max | 1.5 max | 0.5 max | 27.0 – 33.0 | 2.3 – 3.15 | 0.35 – 0.85 | 0.010 max |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel Fasteners | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
At Jyoti Steels, we take pride in being the largest supplier, exporter, and manufacturer of Monel Fasteners in Mumbai, India, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the India, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Monel Fasteners are widely applied in those industries where corrosion resistance, particularly against seawater and corrosive environments, is essential. They are utilized in shipbuilding, underwater pipe work, and pump systems in the marine industry. Chemical processing units use them in reactors, storage tanks, and fluid-handling systems subject to corrosive chemicals. In the oil & gas industry, they are well suited for offshore drilling rigs, pipelines, and pressure vessels. Also used are Monel fasteners in aerospace, nuclear power, and electrical engineering, providing reliable performance where common materials disintegrate with corrosion or temperature degradation.
©2024 Jyoti Steels. All Rights Reserved.
